SPECIFICATION
LOADCELL
Material; Aluminium alloy with HT steel bushes and 8 gauge bridge
LOAD MONITOR
Enclosure Size: 180 x 100 x 44mm with tilt stand
Display: LCD, 4.5 digit. Character Height 12.7mm
On/Off Button: Push On, Push Off
Zero/Tare Button: Button will Tare up to 10% of cell capacity
Peak Button: Retains Load Reading
Reset Button: Resets Peak Reading
DISPLAY INFORMATION
Normal Reading: +0.000
Tare: will show '+' sign with arrow above
Peak: +0.0:00 : flashing
Peak & Tare: +0.0:00 : flashing
Overload: Factory +5% of capacity and flashes 'O-L' (ie) 10 tonne cell will
alternately flash '10.5' then 'O-L'.
BATTERY
9 volt type PP3 - non rechargeable battery saver system will
automatically shut down after 15 minutes. Typical battery life 100 hours, minimum
50 hours. 'LO BATTERY' will flash when
battery has decayed to 7.7 volts. The equipment can be confidently used to
complete any test currently being carried out. The battery must then be changed. |
