SPECIFICATION

Gain Stability: Typically 0.002% per °C.
Zero Stability: Typically 0.0007% per °C.
Sensitivity: Input from strain gauge bridge Min 1.0mv/V to Max 5mv/V.
Temp. Range: 0.0°C to 50.0°C.
Bridge Excitation: 5.0 +/- 0.25 volts D.C. @ up to 25mA bridge current.

DISPLAY INFORMATION
Tare: +/- 15% of full-scale reading including bridge offset.
Decimal Point: During initial set up can be positioned to the right of any of the four significant digits or off.
Conversation Rate: 10 conversations and display updates per second.
Peak: Flashing colons indicate that the monitor is in the peak mode.

BATTERY
Supply: 1xPP3 9Volts Battery**
Auto Power Down: 15 minutes after last button pressed.
Battery Life: Typically 50 hours from a 500mA hr battery using a 700ohm bridge.

Note** we can supply mains power option if required.