| |
 Designed specifically for simple proof load testing
of wire chains, ropes etc...
With the advantage of an open test bed for
the testing of spreader beams and other similar items.
Straining Unit
- Long stroke hydraulic cylinder with double acting
ram.
- Piston head and cylinder ends fitted with low friction
seals.
- Pulling ram terminates in a fixed clevis jaw, with
a similar arrangement on the moving carriage.
Load Control Console
- Digital monitor with 20mm high character readout
connected to load cell by means of multi-core screened cable.
- Peak freeze provision facility for capturing maximum
applied load with reset.
- Pressure Control is achieved by means of a control
valve at the operators position.
- PUMP START push button and
STOP button.
- Optional Data Acquisition Facility showing load and extension.
Load Cell
- Located between the pulling clevis and pull ram
and strain gauge tensile load features a multi bridge with temperature
compensation and close zero balance.
- Calibrated in accordance with International Standard
ISO 7500-1: 2004
Power Pack
- Features a flanged motor close coupled to a single pump
- Filtration provided includes suction line strainer and tank top filler/breather
Test Bed
- Main frame compressing of steel section side frames
cross braced and featuring location points for moving carriage at incremental
positions along the bed.
- The machine is supplied with the group anchor fixing
holes incorporated for 'Thor-bolts', which are recommended in order
to prevent 'tramping'.
- An adjustable carriage is provided supported on free moving rollers
for easy placement of the carriage appropriate to the nominal test
specimen length.
- Machine is fully guarded by fixed plates at base
of bed and manually operated, hinged guards at top of bed section.
- Fixed guard provided for operator protection, plus
visual warning to indicate testing in progress.
Click Here to download PDF
Contact
us for more information... |
